DX51D galvanized steel sheet refers to the sheet with a layer of zinc on the surface. Galvanizing is a commonly used and effective anti-corrosion method. DX51D galvanized steel is divided into DX51D+Z, DX51D+ZF, DX51D+ZA, DX51D+AZ according to the type of
GB/T 2518-2019 : DX51D+Z, DX51D+ZF, DX51D+ZA, DX51D+AZ
EN 10346:2015 : DX51D
JIS G 3302:2012 : SGCC, SGHC
ASTM A653M-17 : CS Type C
Chemical properties:
| dx51d material properties | ||||||
| Grade | Chemical composition (mass fraction)/%, ≤ | |||||
| C | Si | Mn | P | S | Ti | |
DX51D+Z DX51D+ZF DX51D+ZA DX51D+AZ | 0.18 | 0.50 | 1.20 | 0.12 | 0.045 | 0.30 |
Mechancal properties:
| dx51d material properties | |||||
| Grade | Lower yield strength ReL/MPa | Tensile strength Rm/MPa | Elongation after break A80mm/% | Plastic strain ratio r90 | Transverse Tensile Strain Hardening Exponent n90 |
DX51D+Z DX51D+ZF DX51D+ZA DX51D+AZ | - | 270~500 | ≥22 | - | - |
Coating properties:
| dx51d material properties | |||||
| Type of coating | Density d/(g/cm3) | Coating form | Recommended Nominal Coating Weight/(g/m2) | Coating Code | |
| type | code name | ||||
| Pure zinc coating | Z | 7.1 | Equal thickness plating | 60 80 100 120 150 180 200 220 250 275 350 450 600 | 60 80 100 120 150 180 200 220 250 275 350 450 600 |
| Different thickness plating | 30/40 40/60 40/100 | 30/40 40/60 40/100 | |||
| Zinc-iron alloy coating | ZF | 7.1 | Equal thickness plating | 60 90 120 140 | 60 90 120 140 |
| Zinc-aluminum alloy coating | ZA | 6.6 | Equal thickness plating | 60 80 100 120 150 180 200 220 250 275 300 | 60 80 100 120 150 180 200 220 250 275 300 |
| Al-Zn Alloy Coating | AZ | 3.8 | Equal thickness plating | 60 80 100 120 150 180 200 | 60 80 100 120 150 180 200 |
DX51D galvanized steel sheet consists of five parts: product use code, steel type code, steel properties, hot-dip code (D) and coating type code, among which hot-dip code (D) and coating code are connected by "+".
DX of DX51D: the first letter D indicates flat steel for cold forming; the second letter X indicates that the rolling state of the substrate is not specified.
The steel grade characteristic of DX51D galvanized steel sheet is low carbon steel.
DX51D+Z: It is one of the most commonly used coating types in manufacturing and construction.
DX51D+ZF: Suitable for exterior parts such as automobiles and home appliances.
DX51D+ZA: Primarily used in applications where good ductility is required (eg deep drawn parts) and where moderate corrosion resistance is required.
DX51D+AZ: Suitable for environments requiring high corrosion resistance, high temperature resistance and heat reflectivity, such as roofs and walls.
DX51D Galvanized Steel Sheet is widely used in construction,steel cable trunking,ventilation duct, agricultural greenhouses, billboard, roller door, galvanized bucket.etc.
|
Product Name |
DX51D Galvanized Steel Sheet |
|
dx51d specification |
Length: 1-12m or as required |
|
Width: 600mm-1250mm or as required |
|
|
Thickness: 0.4mm-320mm or as required |
|
|
Standard |
GB/T 2518-2019, EN 10346:2015, JIS G 3302:2012, ASTM A653M-17 |
|
Technique |
Cold rolled,Hot rolled |
|
Surface Treatment |
Clean, blasting and painting according to customer requirement |
|
Thickness tolerance |
±0.15mm |
|
Coatings |
Top Coats :5 micron primer + 20 micron colour Back Coat: 5 micron primer – 7 micron primer |
|
MOQ |
1tons. We also can accept sample order. |
|
Shipment time |
Within 10-15 workdays after receiving deposit or L/C |
|
Export packing |
Waterproof paper, and steel strip packed. |
|
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required |
|
| *If you do not find what you are
looking for, please call us now. If you have found it, we are happy to
answer any questions or concerns you may have about stainless steel
grades and assist you through the purchasing process. | |
◆ FAQ:
Q:Can you send samples?
A:Sample can be for free,freight cost collect.
Q:What product information do I need to provide?
A:Steel grade/thickness/width/quantity,these will decide the price.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
Q:What are the certifications for your products?
A:We have ISO 9001,CE,SGS,BV and other certifications.
Q:How about the delivery time?
A:Regularly the delivery time around 10-15 days,customized one will inform the delivery time ahead.
Q:Does the product have quality inspection before loading?
A:All the products are strictly tested before packaging,also can inspect by third party inspection.
Q:How to pack the products?
A:Standard export package with waterproof film and wooden pallet.It can effectively protect products from corrosion.
Leave a Comment